-2 |
No reaction, discard the limit switch position |
-1 (factory settings) |
No reaction (e. g., to execute a homing operation) except noting the limit switch position |
0 |
Switch off driver without deceleration ramp; drive function blocked – motor can turn freely (
Switch on disabled state)
|
1 |
Braking with
slow down ramp (deceleration ramp depending on operating mode) and subsequent state change to
Switch on disabled
|
2 |
Braking with
quick stop ramp and subsequent state change to
Switch on disabled
|
5 |
Braking with
slow down ramp (deceleration ramp depending on operating mode) and subsequent state change to
Quick stop active; control does not switch off and the motor remains energized. You can switch back to the
Operation enabled state.
|
6 |
Braking with
quick stop ramp and subsequent state change to
Quick Stop Active; control does not switch off and the motor remains energized. You can switch back to the
Operation enabled state.
|