1020h Verify Configuration
Function
This object indicates the date and time that the configuration was stored.
A configuration tool or a master can use this object to verify the configuration after a reset and, if necessary, perform a new configuration.
The tool must set the date and time before the storage mechanism is started (see chapter Saving objects).
Object description
Index | 1020h |
Object name | Verify Configuration |
Object Code | ARRAY |
Data type | UNSIGNED32 |
Savable | yes, category: verify |
Access | read only |
PDO mapping | no |
Allowed values | |
Preset value | |
Firmware version | FIR-v1540 |
Change history |
Value description
Subindex | 00h |
Name | Number Of Entries |
Data type | UNSIGNED8 |
Access | read only |
PDO mapping | no |
Allowed values | |
Preset value | 02h |
Subindex | 01h |
Name | Configuration Date |
Data type | UNSIGNED32 |
Access | read / write |
PDO mapping | no |
Allowed values | |
Preset value | 00000000h |
Subindex | 02h |
Name | Configuration Time |
Data type | UNSIGNED32 |
Access | read / write |
PDO mapping | no |
Allowed values | |
Preset value | 00000000h |
Description
Subindex 01h (configuration date) is to contain the number of days since 1 January 1984.
Subindex 02h (configuration time) is to contain the number of milliseconds since midnight.