2017h LLDP Non-volatile Storage
Function
The settings for the LLDP Link-Layer Discovery Protocol are saved (category Ethernet) in this object..
Object description
Index | 2017h |
Object name | LLDP Non-volatile Storage |
Object Code | ARRAY |
Data type | UNSIGNED16 |
Savable | yes, category: Ethernet |
Access | read only |
PDO mapping | no |
Allowed values | |
Preset value | |
Firmware version | FIR-v2239-B1032745 |
Change history |
Value description
Subindex | 00h |
Name | Number Of Entries |
Data type | UNSIGNED8 |
Access | read only |
PDO mapping | no |
Allowed values | |
Preset value | 03h |
Subindex | 01h |
Name | LLDP_Enable -used Lower Byte Only |
Data type | UNSIGNED16 |
Access | read only |
PDO mapping | no |
Allowed values | |
Preset value | 0007h |
Subindex | 02h |
Name | Tx_Timeout |
Data type | UNSIGNED16 |
Access | read only |
PDO mapping | no |
Allowed values | |
Preset value | 001Eh |
Subindex | 03h |
Name | MsgTxHold -used Lower Byte Only |
Data type | UNSIGNED16 |
Access | read only |
PDO mapping | no |
Allowed values | |
Preset value | 0004h |
Description
The subindices have the following function:
- 01h (LLDP_Enable):
- Bit "0": Global Enable if set to "1"
- Bit "1": LLDP Tx & Rx Enabled if set to "1"
- Bit "2": LLDP Tx Enabled if set to "1"
- 02h (Tx_Timeout): The interval in seconds at which LLDP frames are transmitted from this device.
- 03h (MsgTxHold): Message Transmission Multiplier for LLDP Frames