4021h Ballast Configuration Function With this object, you switch the ballast circuit on or off and determine its response threshold. Furthermore, you configure the ballast monitoring. You can find details in chapter External ballast circuit. Object description Index 4021h Object name Ballast Configuration Object Code ARRAY Data type UNSIGNED32 Savable yes, category: tuning Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v2013-B726332 Change history Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value 08h Subindex 01h Name Settings [Bit0: On/Off, Bit1: Polarity] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Subindex 02h Name UB Power Limit [mV] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 0000ED49h Subindex 03h Name UB Power Hysteresis [mV] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 000001F4h Subindex 04h Name Nominal Resistance [mOhm] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 05h Name Long Term Energy Limit [mWs] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 06h Name Long Term Reference Time [ms] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Subindex 07h Name Short Term Energy Limit [mWs] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Subindex 08h Name Cooling Power [mW] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Description The subindices have the following function: 01h: Bit 0: Switches the ballast on (value = "1") or off (value = "0") Bit 1: Inverts (value = "1") the polarity of the pins for controlling the external ballast circuit (factory setting: active high) 02h: Response threshold (switch on/off) of the ballast circuit 03h: Hysteresis for the response threshold (switch on/off) 04h: Rated value of the ballast resistor 04h: Rated value of the ballast resistor 05h: Amount of energy that can be supplied to the resistor within the Long Term Reference Time (subindex 06h) without overloading it. 06h: The reference time for the Long Term Energy Limit (subindex 05h) (typically between 1 and 5 seconds) 07h: Amount of energy that can be supplied to the resistor within a short load surge (<1 second) without overloading it. 08h: The amount of heat that the resistor can/may constantly discharge to its surroundings.
4021h Ballast Configuration Function With this object, you switch the ballast circuit on or off and determine its response threshold. Furthermore, you configure the ballast monitoring. You can find details in chapter External ballast circuit. Object description Index 4021h Object name Ballast Configuration Object Code ARRAY Data type UNSIGNED32 Savable yes, category: tuning Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v2013-B726332 Change history Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value 08h Subindex 01h Name Settings [Bit0: On/Off, Bit1: Polarity] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Subindex 02h Name UB Power Limit [mV] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 0000ED49h Subindex 03h Name UB Power Hysteresis [mV] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 000001F4h Subindex 04h Name Nominal Resistance [mOhm] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 05h Name Long Term Energy Limit [mWs] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 06h Name Long Term Reference Time [ms] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Subindex 07h Name Short Term Energy Limit [mWs] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Subindex 08h Name Cooling Power [mW] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Description The subindices have the following function: 01h: Bit 0: Switches the ballast on (value = "1") or off (value = "0") Bit 1: Inverts (value = "1") the polarity of the pins for controlling the external ballast circuit (factory setting: active high) 02h: Response threshold (switch on/off) of the ballast circuit 03h: Hysteresis for the response threshold (switch on/off) 04h: Rated value of the ballast resistor 04h: Rated value of the ballast resistor 05h: Amount of energy that can be supplied to the resistor within the Long Term Reference Time (subindex 06h) without overloading it. 06h: The reference time for the Long Term Energy Limit (subindex 05h) (typically between 1 and 5 seconds) 07h: Amount of energy that can be supplied to the resistor within a short load surge (<1 second) without overloading it. 08h: The amount of heat that the resistor can/may constantly discharge to its surroundings.
Function With this object, you switch the ballast circuit on or off and determine its response threshold. Furthermore, you configure the ballast monitoring. You can find details in chapter External ballast circuit.
Object description Index 4021h Object name Ballast Configuration Object Code ARRAY Data type UNSIGNED32 Savable yes, category: tuning Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v2013-B726332 Change history
Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value 08h Subindex 01h Name Settings [Bit0: On/Off, Bit1: Polarity] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Subindex 02h Name UB Power Limit [mV] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 0000ED49h Subindex 03h Name UB Power Hysteresis [mV] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 000001F4h Subindex 04h Name Nominal Resistance [mOhm] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 05h Name Long Term Energy Limit [mWs] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000001h Subindex 06h Name Long Term Reference Time [ms] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Subindex 07h Name Short Term Energy Limit [mWs] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h Subindex 08h Name Cooling Power [mW] Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value 00000000h
Description The subindices have the following function: 01h: Bit 0: Switches the ballast on (value = "1") or off (value = "0") Bit 1: Inverts (value = "1") the polarity of the pins for controlling the external ballast circuit (factory setting: active high) 02h: Response threshold (switch on/off) of the ballast circuit 03h: Hysteresis for the response threshold (switch on/off) 04h: Rated value of the ballast resistor 04h: Rated value of the ballast resistor 05h: Amount of energy that can be supplied to the resistor within the Long Term Reference Time (subindex 06h) without overloading it. 06h: The reference time for the Long Term Energy Limit (subindex 05h) (typically between 1 and 5 seconds) 07h: Amount of energy that can be supplied to the resistor within a short load surge (<1 second) without overloading it. 08h: The amount of heat that the resistor can/may constantly discharge to its surroundings.
