2102h Fieldbus Module Control Function This object can be used to activate/deactivate certain fieldbuses (physical interfaces and protocols). Object description Index 2102h Object name Fieldbus Module Control Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: communication Access read / write PDO mapping no Allowed values Preset value 00020010h Firmware version FIR-v1540 Change history Firmware version FIR-v1626: "Savable" entry changed from "yes, category: application" to "yes, category: communication". Description Object 2103h:1h contains all physical interfaces/protocols that can be activated/deactivated. These can be switched in this object (2102h). The current status of the activated fieldbuses is in object 2103h:2h. The following distribution of the bits applies here: USB USB interface RS-485 RS-485 interface RS-232 RS-232 interface CAN CANopen interface E-NET EtherNet interface E-CAT EtherCAT interface SPI SPI interface MRTU Modbus RTU protocol MTCP Modbus TCP protocol E-IP EtherNet/IP™ protocol
2102h Fieldbus Module Control Function This object can be used to activate/deactivate certain fieldbuses (physical interfaces and protocols). Object description Index 2102h Object name Fieldbus Module Control Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: communication Access read / write PDO mapping no Allowed values Preset value 00020010h Firmware version FIR-v1540 Change history Firmware version FIR-v1626: "Savable" entry changed from "yes, category: application" to "yes, category: communication". Description Object 2103h:1h contains all physical interfaces/protocols that can be activated/deactivated. These can be switched in this object (2102h). The current status of the activated fieldbuses is in object 2103h:2h. The following distribution of the bits applies here: USB USB interface RS-485 RS-485 interface RS-232 RS-232 interface CAN CANopen interface E-NET EtherNet interface E-CAT EtherCAT interface SPI SPI interface MRTU Modbus RTU protocol MTCP Modbus TCP protocol E-IP EtherNet/IP™ protocol
Function This object can be used to activate/deactivate certain fieldbuses (physical interfaces and protocols).
Object description Index 2102h Object name Fieldbus Module Control Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: communication Access read / write PDO mapping no Allowed values Preset value 00020010h Firmware version FIR-v1540 Change history Firmware version FIR-v1626: "Savable" entry changed from "yes, category: application" to "yes, category: communication".
Description Object 2103h:1h contains all physical interfaces/protocols that can be activated/deactivated. These can be switched in this object (2102h). The current status of the activated fieldbuses is in object 2103h:2h. The following distribution of the bits applies here: USB USB interface RS-485 RS-485 interface RS-232 RS-232 interface CAN CANopen interface E-NET EtherNet interface E-CAT EtherCAT interface SPI SPI interface MRTU Modbus RTU protocol MTCP Modbus TCP protocol E-IP EtherNet/IP™ protocol
