2035h Lower Voltage Warning Level Function This object contains the threshold value for the "Undervoltage" error in millivolts. Object description Index 2035h Object name Lower Voltage Warning Level Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: application Access read / write PDO mapping no Allowed values Preset value PD4-E591L42-E-65-5: 00002710h PD4-E601L42-E-65-5: 00002710h PD4-EB59CD-E-65-5: 00002710h PD4-EB60SD-E-65-5: 00002710h PD4-E591L42-EB-65-5: 00005780h PD4-EB59CD-EB-65-5: 00005780h Firmware version FIR-v1426 Change history Description If the input voltage of the controller falls below this threshold value, the motor is switched off and an error triggered. The error is reset automatically if the input voltage exceeds the voltage of object 2035h plus 1.5 volts.
2035h Lower Voltage Warning Level Function This object contains the threshold value for the "Undervoltage" error in millivolts. Object description Index 2035h Object name Lower Voltage Warning Level Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: application Access read / write PDO mapping no Allowed values Preset value PD4-E591L42-E-65-5: 00002710h PD4-E601L42-E-65-5: 00002710h PD4-EB59CD-E-65-5: 00002710h PD4-EB60SD-E-65-5: 00002710h PD4-E591L42-EB-65-5: 00005780h PD4-EB59CD-EB-65-5: 00005780h Firmware version FIR-v1426 Change history Description If the input voltage of the controller falls below this threshold value, the motor is switched off and an error triggered. The error is reset automatically if the input voltage exceeds the voltage of object 2035h plus 1.5 volts.
Object description Index 2035h Object name Lower Voltage Warning Level Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: application Access read / write PDO mapping no Allowed values Preset value PD4-E591L42-E-65-5: 00002710h PD4-E601L42-E-65-5: 00002710h PD4-EB59CD-E-65-5: 00002710h PD4-EB60SD-E-65-5: 00002710h PD4-E591L42-EB-65-5: 00005780h PD4-EB59CD-EB-65-5: 00005780h Firmware version FIR-v1426 Change history
Description If the input voltage of the controller falls below this threshold value, the motor is switched off and an error triggered. The error is reset automatically if the input voltage exceeds the voltage of object 2035h plus 1.5 volts.
