1010h Store Parameters Function This object is used to start the saving of objects. See chapter Saving objects. Object description Index 1010h Object name Store Parameters Object Code ARRAY Data type UNSIGNED32 Savable no Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v1426 Change history Firmware version FIR-v1436: "Object name" entry changed from "Store Parameter" to "Store Parameters". Firmware version FIR-v1436: The number of entries was changed from 3 to 4. Firmware version FIR-v1512: The number of entries was changed from 4 to 5. Firmware version FIR-v1540: The number of entries was changed from 5 to 7. Firmware version FIR-v1738-B501312: The number of entries was changed from 7 to 14. Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value Subindex 01h Name Save All Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 02h Name Save Communication Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 03h Name Save Application Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 04h Name Save Customer Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 05h Name Save Drive Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 06h Name Save Tuning Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 07h Name Save Miscellaneous Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 08h Name Save Reserved1 Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 09h Name Save Reserved2 Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Ah Name Save CANopen Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Bh Name Save Modbus RTU Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Ch Name Save Ethernet Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Dh Name Save Profibus Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Description Each subindex of the object stands for a certain memory class. By reading out the entry, it is possible to determine whether (value "1") or not (value="0") this memory category can be saved. To start the save process of a memory category, value "65766173h" must be written in the corresponding subindex. This corresponds to the decimal of 1702257011d or the ASCII string save. As soon as the saving process is completed, the save command is again overwritten with the value "1", since saving is possible again. For a detailed description, see chapter Saving objects.
1010h Store Parameters Function This object is used to start the saving of objects. See chapter Saving objects. Object description Index 1010h Object name Store Parameters Object Code ARRAY Data type UNSIGNED32 Savable no Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v1426 Change history Firmware version FIR-v1436: "Object name" entry changed from "Store Parameter" to "Store Parameters". Firmware version FIR-v1436: The number of entries was changed from 3 to 4. Firmware version FIR-v1512: The number of entries was changed from 4 to 5. Firmware version FIR-v1540: The number of entries was changed from 5 to 7. Firmware version FIR-v1738-B501312: The number of entries was changed from 7 to 14. Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value Subindex 01h Name Save All Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 02h Name Save Communication Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 03h Name Save Application Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 04h Name Save Customer Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 05h Name Save Drive Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 06h Name Save Tuning Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 07h Name Save Miscellaneous Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 08h Name Save Reserved1 Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 09h Name Save Reserved2 Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Ah Name Save CANopen Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Bh Name Save Modbus RTU Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Ch Name Save Ethernet Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Dh Name Save Profibus Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Description Each subindex of the object stands for a certain memory class. By reading out the entry, it is possible to determine whether (value "1") or not (value="0") this memory category can be saved. To start the save process of a memory category, value "65766173h" must be written in the corresponding subindex. This corresponds to the decimal of 1702257011d or the ASCII string save. As soon as the saving process is completed, the save command is again overwritten with the value "1", since saving is possible again. For a detailed description, see chapter Saving objects.
Object description Index 1010h Object name Store Parameters Object Code ARRAY Data type UNSIGNED32 Savable no Access read only PDO mapping no Allowed values Preset value Firmware version FIR-v1426 Change history Firmware version FIR-v1436: "Object name" entry changed from "Store Parameter" to "Store Parameters". Firmware version FIR-v1436: The number of entries was changed from 3 to 4. Firmware version FIR-v1512: The number of entries was changed from 4 to 5. Firmware version FIR-v1540: The number of entries was changed from 5 to 7. Firmware version FIR-v1738-B501312: The number of entries was changed from 7 to 14.
Value description Subindex 00h Name Number Of Entries Data type UNSIGNED8 Access read only PDO mapping no Allowed values Preset value Subindex 01h Name Save All Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 02h Name Save Communication Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 03h Name Save Application Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 04h Name Save Customer Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 05h Name Save Drive Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 06h Name Save Tuning Parameters To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 07h Name Save Miscellaneous Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 08h Name Save Reserved1 Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 09h Name Save Reserved2 Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Ah Name Save CANopen Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Bh Name Save Modbus RTU Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Ch Name Save Ethernet Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value Subindex 0Dh Name Save Profibus Configurations To Non-volatile Memory Data type UNSIGNED32 Access read / write PDO mapping no Allowed values Preset value
Description Each subindex of the object stands for a certain memory class. By reading out the entry, it is possible to determine whether (value "1") or not (value="0") this memory category can be saved. To start the save process of a memory category, value "65766173h" must be written in the corresponding subindex. This corresponds to the decimal of 1702257011d or the ASCII string save. As soon as the saving process is completed, the save command is again overwritten with the value "1", since saving is possible again. For a detailed description, see chapter Saving objects.
