2010h IP-Configuration Function Use this object to configure the Ethernet interface. The object is only taken into consideration once when restarting the controller. You can find further details in chapter Commissioning. Object description Index 2010h Object name IP-Configuration Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: Ethernet Access read / write PDO mapping no Allowed values Preset value 0000006Ch Firmware version FIR-v1426 Change history Firmware version FIR-v1748-B533384: "Savable" entry changed from "yes, category: communication" to "yes, category: Ethernet". Description IP Value = "1": A static IP address from object 2011h is used and the network mask from object 2012h is used. DHCP Value = "1": IP address assignment using a DHCP server is activated AUTO Value = "1": IP address assignment using the AUTO-IP protocol is activated NBIOS Value = "1": The NetBIOS protocol is activated; this is necessary before resolving a hostname (e.g., with a ping command). LLMNR Value = "1": The LLMNR protocol is activated; this is necessary before resolving a hostname (e.g., with a ping command). Note: To avoid conflicts, never simultaneously set bit 0 (static IP address) and bits 2 and 3 (DHCP or Auto-IP) to "1".
2010h IP-Configuration Function Use this object to configure the Ethernet interface. The object is only taken into consideration once when restarting the controller. You can find further details in chapter Commissioning. Object description Index 2010h Object name IP-Configuration Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: Ethernet Access read / write PDO mapping no Allowed values Preset value 0000006Ch Firmware version FIR-v1426 Change history Firmware version FIR-v1748-B533384: "Savable" entry changed from "yes, category: communication" to "yes, category: Ethernet". Description IP Value = "1": A static IP address from object 2011h is used and the network mask from object 2012h is used. DHCP Value = "1": IP address assignment using a DHCP server is activated AUTO Value = "1": IP address assignment using the AUTO-IP protocol is activated NBIOS Value = "1": The NetBIOS protocol is activated; this is necessary before resolving a hostname (e.g., with a ping command). LLMNR Value = "1": The LLMNR protocol is activated; this is necessary before resolving a hostname (e.g., with a ping command). Note: To avoid conflicts, never simultaneously set bit 0 (static IP address) and bits 2 and 3 (DHCP or Auto-IP) to "1".
Function Use this object to configure the Ethernet interface. The object is only taken into consideration once when restarting the controller. You can find further details in chapter Commissioning.
Object description Index 2010h Object name IP-Configuration Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: Ethernet Access read / write PDO mapping no Allowed values Preset value 0000006Ch Firmware version FIR-v1426 Change history Firmware version FIR-v1748-B533384: "Savable" entry changed from "yes, category: communication" to "yes, category: Ethernet".
Description IP Value = "1": A static IP address from object 2011h is used and the network mask from object 2012h is used. DHCP Value = "1": IP address assignment using a DHCP server is activated AUTO Value = "1": IP address assignment using the AUTO-IP protocol is activated NBIOS Value = "1": The NetBIOS protocol is activated; this is necessary before resolving a hostname (e.g., with a ping command). LLMNR Value = "1": The LLMNR protocol is activated; this is necessary before resolving a hostname (e.g., with a ping command). Note: To avoid conflicts, never simultaneously set bit 0 (static IP address) and bits 2 and 3 (DHCP or Auto-IP) to "1".
