323Ah User Pin Settings
Function
With this object, you can configure the digital inputs/outputs as described in chapter Digital inputs and outputs.
Object description
| Index | 323Ah |
| Object name | User Pin Settings |
| Object Code | ARRAY |
| Data type | UNSIGNED8 |
| Savable | yes, category: application |
| Access | read only |
| PDO mapping | no |
| Allowed values | |
| Preset value | |
| Firmware version | FIR-v2339-B1048823 |
| Change history |
Value description
| Subindex | 00h |
| Name | Number Of Entries |
| Data type | UNSIGNED8 |
| Access | read only |
| PDO mapping | no |
| Allowed values | |
| Preset value | 02h |
| Subindex | 01h |
| Name | Voltage Level Select |
| Data type | UNSIGNED8 |
| Access | read / write |
| PDO mapping | RX-PDO |
| Allowed values | |
| Preset value | 00h |
| Subindex | 02h |
| Name | Pull-Up Enable |
| Data type | UNSIGNED8 |
| Access | read / write |
| PDO mapping | RX-PDO |
| Allowed values | |
| Preset value | 00h |
Description
- Subindex 01h: Here, you define the level for the inputs/outputs:
- Value "0": 5 V
- Value "1": 24 V (inputs) or +Up (outputs)
Note: Use for the inputs a voltage that is smaller than the operating voltage +Up. - Subindex 02h: Here, you define the type of digital inputs:
- Value "0" (Pull-Down): High level when 5/24 V at Pin.
- Value "1" (Pull-Up): High level without external voltage at Pin.